Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
Other Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 μW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1,710 kHz
Aerials
FM: Telescopic aerial
AM:
Recording system
Approx. 120s (sec.) with Sony cassette
TYPE I (normal): 50 - 15,000 Hz
46Additional Information
General
Speaker
Full range: 8 cm (3 1⁄4 in.) dia., 3 ohms, cone type x 2
Input
LINE IN jack (stereo minijack) Minimum input level 250 mV
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones LINE OUT jack (stereo minijack)
Rated output level 250 mV at load impedance 47 kilohms
OPTICAL DIGITAL OUT (CD) (optical output connector)
Wavelength: 630 - 690 nm Power output (excluding U.S. model)
4.5W + 4.5 W (3 ohms at 10 % harmonic distortion in DC operation)
Power requirements
For Personal Audio System:
120 V AC, 60 Hz
12 V DC, 8 size D (R20 ) batteries
For memory
6 V DC, 4 size AA (R6) batteries
For remote commander:
3 V DC, 2 size AA (R6) batteries Power consumption
AC 25 W
Battery life
For Personal Audio System:
FM recording
Sony R20P: approx. 6 h
Sony alkaline LR20: approx. 12 h
Tape playback
Sony R20P: approx. 3 h
Sony alkaline LR20: approx. 6 h
CD playback
Sony R20P: approx. 1.5 h
Sony alkaline LR20: approx. 3 h
Dimensions (incl. projecting parts)
Approx. 416 × 198.5 × 246 mm (w/h/d) (16 1⁄2 × 7 7⁄8 × 9 3⁄4 inches)
Mass (incl. batteries)
Approx. 5.2 kg (11 lb. 7 oz) Supplied accessories
AC power cord (1) Remote commander (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphone series