Tip
When you record a programme of a station whose name is labeled on this player, the station name is recorded automatically as the track name (up to 50 names) (page 24).
Notes
•After you stop recording,
do not disconnect the mains lead or move the player while “TOC EDIT” is flashing in the display. If you do so, recording may not be done properly.
•If you turn up the volume too high, sound skipping may occur.
Tips
•To record over the previous recording, see page 38.
•To add track marks during recording, press REC where you want to add track marks.
•To add track marks after recording, see “Dividing recorded tracks” on page 44.
To pause recording
Press MD ^(MD Pon the remote). Press the button again to resume recording.
Recording from a CD
Track marks on the source CD are recorded on the same positions on the MD. Track marks are also added automatically on the MD when you pause recording.
If unnecessary track marks are added, erase them after recording (see ”Combining recorded tracks” on page 46).
1 Insert a CD.
2 Press CD pto activate the CD player.
3 Insert a recordable MD.
4 Press REC (ron the remote).
The player stands by for recording.
5 Press MD ^(MD (or MD Pon the remote).
Recording will be made from the last recorded position.
6 Press CD ^.
To stop recording
Press MD p.
To pause recording
Press MD ^(MD Pon the remote). Press the button again to resume recording.
Recording
Recording 37GB