Labelling recordings (Name function) (continued)
Tip
When using an MD that has been already labeled, a disc name or a track name appears in the display at the time of labelling. Change the name according to step 3 on page 50, if necessary, then press YES• ENTER to confirm the new name.
Labelling after recording
To label an MD or a track, operate as follows. You can input up to 100 characters for each label.
1 When you label an MD, insert the MD you want to label and stop operation.
When you label a track, play the track you want to label.
2 Press EDIT repeatedly until “Disc Name” or “Track Name” appears in the display, and press YES•ENTER.
When you label an MD, select “Disc Name”.
When you label a track, select “Track Name”.
3 Label the MD or the track according to steps 3 and 4 on page 50.
4 After completing an entire name, press YES•
ENTER.
The name is labelled on the MD.
To change the name
According to step 1 on this page, make the disc name or the track name you want to change appear in the display. Replace the old name with a new one, and press YES•ENTER.
52GB Editing recorded tracks on the MD