Timer-recording radio programmes (continued)

Tips

To exit the standby mode, press STANDBY to make “TIMER REC” disappear from the display.

The preset settings remain until you reset them.

As long as the t indication appears in the display, the player is in timer mode.

6 Set the timer to the hour and the minutes you want to stop recording. (Do as step 5.)

7 Turn the jog dial to set the volume you want, and press YES•ENTER.

8 Press STANDBY.

“TIMER REC” is displayed, and the player enters the standby mode.

At the preset time, the power will go on and the recording will start. Then the power will go off at the preset time, and the player will enter the standby mode again.

To check/change the recording timer settings

Press TIMER, then press YES•ENTER. Each time you press YES•ENTER, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it.

To use the player before a timer-recording starts

If you turn on the player, you can use it as usual (in case of the radio, if you listen to the station which is different from the one you tuned in step 1 on page 57, you will hear that station at the preset time). Turn off the player before the preset time.

To stop timer-recording

Turn off the power.

58GB The Timer