Getting Started
What cords will I need?
•Audio cord (1) (supplied with the player to be connected)
•CONTROL A1 cord (1) (not supplied)
1Connect the players with the audio cord (see also “Hookups” on page 5).
LINE | LINE OUT | |
IN | OUT |
|
L | L | L |
R | R | R |
2Connect the players with the CONTROL A1 cord.
CONTROL A1 | CONTROL A1 |
For details on this connection, refer to the supplementary
3Set the COMMAND MODE selector of each player.
Leave the COMMAND MODE of this player set to CD2, and set that of the second player to CD3
COMMAND MODE
CD
1 2 3
4Connect the AC power cord of the second player to AC OUTLET on the rear of this player.
When you turn on both players and this player detects the second player, “REMOTE” appears in the second player‘s display.
You cannot operate the second player using the controls on the second player while “REMOTE” appears in the second player’s display.
REMOTE
CD3
While the second player is selected, “2nd PLAYER” appears in this player‘s front panel display.
Note
Do not connect a player other than a Sony CD player equipped with the CONTROL A1 jacks to the LINE IN jacks of this player. If you do, a loud noise may occur and damage the speakers.
You can connect the CD player
Connect the CONTROL A1 jack of this player and the CONTROL A jack of the
Note that you cannot use the
7
