5 System Connector Interface

5.1 Overview

Electrical connections to the wireless modem (except the antenna), are made through the System Connector Interface. The system connector is a 100-pin, narrow (0.5 mm) pitch device designed for board-to-board connectivity.

Figure 5.1-1 below shows the numbering of the connector pins.

Pin 100

Pin 2

Pin 99

Pin 1

Figure 5.1-1 Wireless modem, viewed from underneath

A mating (host circuit board) connector can be obtained from Panasonic by ordering the following part

TIP

100 PIN SOCKET AXK5F00547YG

 

The following table gives the pin assignments for the system connector interface and a short description for each signal.

LZT 123 1836

26