Charging the Battery Pack

The battery pack is not fully charged at the time of purchase. Be sure to charge the battery pack before using the cell phone for the first time.

Use the included AC adapter cable when charging.

When you start charging the battery with the IS11S powered off, the power turns on. However, you cannot operate the au phone. Do not charge the battery in a place where the use is prohibited such as in airplane or hospital.

Charging the Battery Pack with the AC

Adapter

Included AC adapter cable is necessary.

1Insert the microUSB cable horizontally with the

microUSB plug engraved side facing down into the connector for microUSB cable of the IS11S.

2Insert the microUSB cable horizontally with

the USB plug engraved side facing up into the connector for USB of the AC Adapter, and insert the AC Adapter plug to the power outlet.

• Notification LED of IS11S turns on and appears.

3When the charging is completed, remove the microUSB plug of the microUSB cable from the IS11S.

4Remove the AC Adapter from the power outlet.

Charging the Battery Pack with a PC

Included microUSB cable is necessary. Check the connecting direction to connect correctly. Wrong connection may cause damage.

1Insert the microUSB cable horizontally with the

microUSB plug engraved side facing down into the connector for microUSB cable of the IS11S.

2Insert the USB plug of the microUSB cable into the USB port of a PC.

Notification LED of IS11S turns on and appears.

When a confirmation screen for installation of PC Companion software appears on the IS11S, tap Skip.

When a screen for new hardware detection etc. appears on the PC, select Cancel.

3When the charging is completed, remove the microUSB plug of the microUSB cable from the IS11S.

Ready Getting

9