Ready Getting
Inserting/Removing microSD Memory Card
You can save, move or copy data by inserting micoSD memory card (including microSDHC) into the IS11S. And you can copy contacts etc. to microSD memory card.
•A microSDHC memory card (32GB) (sample) is inserted in the IS11S when purchased.
•When a microSD card is not inserted, camera functions, playing, downloading music or videos or infrared communication are not available.
■Installing microSD Memory Card
1Turn the IS11S off, put your tip of thumb (nail) into the groove, and hold the battery pack cover up to remove.
2Check the orientation of microSD memory card, and insert it slowly straight until it clicks.
•Insert a microSD memory card, with the metal contact side facing up. Make sure that you hear it click and lock in place. Note that microSD memory card may pop up if you release your finger before locked.
3Check the direction of the battery pack cover and attach to the cell phone body, press each tab to close it firmly.
■Removing microSD Memory Card
When removing the microSD memory card, be sure to unmount first.
1From the Home screen, t→ Settings →
Storage → Unmount SD card
• 
appears in the status bar when unmounted.
2Turn the IS11S off, put your tip of thumb (nail) into the groove, and hold the battery pack cover up to remove.
3Insert the microSD memory card straight into the slot all the way until it clicks.
•If you hear a click, pull your finger back while touching the microSD memory card. Keep touching the microSD memory card because it pops out a little. Be careful that it may pop out strongly if you press it hard and release your finger.
4Pull out microSD memory card slowly.
•Slowly pull it out straight.
•If the microSD memory card does not pop out, gently draw it out with your fingers to remove.
•Do not pull out microSD memory card forcibly. May cause data loss or malfunction.
5Check the direction of the battery pack cover and attach to the cell phone body, press each tab to close it firmly.
12