To reject a call using voice commands

When the phone rings, say “Busy”. The call is rejected. The caller is forwarded to voicemail, if activated, or hears a busy tone.

Editing Your Voice Commands You can keep all your voice commands up to date by rerecording them or deleting the ones you do not use. You can also edit a voice command for a phone number in the phonebook. Select the contact you want to edit a voice command for } More } Edit contact. Scroll to the relevant tab and edit your voice command.

To rerecord a voice command1} Settings } the General tab } Voice Control } Voice dialing } Edit names.2Select a voice command }More }Replace voice.3Lift the phone to your ear, wait for the tone and say the command.

Tips When Recording And Using Voice Commands If your phone cannot detect your voice command, one of the following might have happened: • You spoke too softly – try speaking louder.

Calling

You held the phone too far away – hold it as you do during a call.

The voice command was too short – it should be around one second long and more than one syllable.

You spoke too late or too soon – speak immediately after the tone.

You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.

You used another intonation – use the same intonation as in the recorded voice command.

Forwarding Calls If you cannot answer incoming calls, you can forward them to another number, for example, your answering service.

When the Restrict calls function is activated, some forward calls options are not available.

You can choose between the following forward options:Forward always – forward all calls.When busy – forward calls if you are alreadyon the phone.

This is the Internet version of the user's guide. © Print only for private use.

27