Features

The NSP-1 Network Player plays back (decodes) video/ audio data in MPEG format, outputting an analog signal. It is the ideal digital content player for advertising, presentations, training, and other situations.

The following are the principal features of this system.

High Image Quality

Plays MPEG-2 MP@ML encoded movies and full-color still images and Web screen, providing an image quality comparable to that of a DVD player.

Superimposed Movies, Stills, and Text With a playlist, you can specify movies, stills, and superimposed captions to be displayed simultaneously on the monitor for specified durations.

Large Storage Capacity

The unit incorporates a 40-GB hard disk drive. This holds about six hours and 30 minutes of video compressed to a bit rate of 8 Mbps, or about 13 hours of video at 4 Mbps. 1)

1)Figures for storage times are for storing movies only. Depending on how the system is used, the actual movie storage capacity may be less than these figures.

Wide Range of Interfaces Supported

•Analog video input: Composite video input is available. This allows you to overlay moving images sent from a VTR or DVD over a still image.

•Analog audio input: Two input channels (left and right) are available. This allows the unit to output mixed audio signals input from a VTR or DVD.

•Analog video output: Composite video output is available.

•Analog audio output: Two output channels (left and right) are available.

•10BASE-T/100BASE-TX: Network connection is possible.

•GPI: This allows remote control of the monitor and other external devices connected to this unit.

Image Rotation on the monitor screen display Since you can rotate the direction of the still image displayed, you are not required to create still images for vertical display.

Compact and Lightweight

The dimensions (width/height/depth) are 210 ⋅ 44 ⋅ 167

mm(8 3/5 ⋅ 1 3/4 ⋅ 6 5/8 inches), and the unit weighs only about 1.5 kilogram (3 lb 6 oz), despite incorporating a large-capacity hard disk drive.

4 Features