2 Enter the same password as the one entered in step 1.
3 Click the “Send” button.
The password for the Admin Account is changed.
Setting/changing a password for a public user account
This is the password for a user who accesses this unit from the application software.
This user is allows to open the status page.
1 Enter the new password in the “Password” text box of the “Public Account” column.
2 Enter the same password as the one entered in step 1.
3 Click the “Send” button.
The password for the Public Account is changed.
Setting/changing a password for status user account
This is the password for a user who is allowed only to access the status page.
1 Enter the new password in the “Password” text box of the “Status User Account” column.
2 Enter the same password as the one entered in step 1.
3 Click the “Send” button.
The password for the Status User Account is changed.
Setting/changing a password for the root account
This is the password to be used for performing maintenance or making special settings such as creating new application software. It is recommended that you change the password for the root account when a security may be a problem because the network is connected to public networks, etc.
1 Enter the new password in the “Password” text box of the “Root Account” column.
2 Enter the same password as the one entered in step 1 in the “Confirmation” text box.
3 Click the “Send” button.
The password for the Root Account is changed.
When All of the Settings for All of Pages Are Completed
Click the “Reboot” button on the last page where you made the settings.
This unit is turned off and then is turned on again. Settings made on each page are now valid.
Note
When the Account Settings page is the last page where you made settings, open a different page and click the “Reboot” button on that page.
Setup 13