HT2310 / CHT2310
8. Maintenance
PROCEDURES TO BE PERFORMED AF- TER EVERY 100 HOURS OF USE
1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylin- der exhaust port at the same time.
2.Tighten all screws, bolts, and fittings.
3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has, wipe it away using
9. Storage
1.Oil the blade to prevent rust.
2.Empty the fuel tank and put the cap back on.
3.Remove the spark plug, pour a small amount of oil into the cylinder.
4.Rotate the crankshaft several times using the start- ing rope in order to distribute the oil. Put the spark plug back in.
5.Wrap the engine with a plastic sheet.
6.Store the trimmer in a dry place, preferably not in direct contact with the floor and away from heat sources.
10. Disposal
When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.
