This is the Internet version of the user’s guide. © Print only for private use.

Security

On the Settings tab you can set the Bluetooth security related settings of your P900.

Bluetooth on

All Bluetooth wireless technology functionality from

 

your P900 works. Visibility according to the Visible

 

to other devices setting.

 

Set Bluetooth to Off if you do not use Bluetooth, it

 

will decrease battery drain. Bluetooth will

 

automatically switch on if you use Send as >

 

Bluetooth from the applications

Visible to

Yes: All Bluetooth wireless technology functionality

other devices

from your P900 works.

 

No: All Bluetooth wireless technology functionality

 

from your P900 works but you cannot receive

 

beamed items, and other devices cannot initiate

 

pairing with your P900. You cannot use your P900 as

 

a modem, it is not possible to connect from a PC and

 

voice dialling from a headset is not possible.

Set the baud rate, parity, number of stop bits, character length and type of flow control required for the connection. When connecting your P900 via the desk stand to a USB port on your PC, use the following (default) settings:

Baud rate

460800

Parity

None

Stop bits

1

Character length

8

Flow control

CTS/RTS

Tip You can set the cable connection mode when the Flip is

closed by selecting Applications > Connections >

Cable.

Cable

Use Cable to set the cable connection mode and the connection parameters used when communicating through your P900's cable port.

Set the cable connection mode. Please note that you must set the mode to Modem when using the P900 as a modem and when using the DUN (Dial-up Networking) Wizard.

Control panel

147