This is the Internet version of the user’s guide. © Print only for private use.

Uninstalling applications

If you uninstall an application, you can always reinstall it if you want to use it later.

To uninstall applications

1.Select Uninstall.

A list of applications that can be uninstalled is shown.

2.Select the application to uninstall.

3.Select Uninstall.

Note You cannot uninstall the standard applications that came with your P900.

WIM PIN settings

WIM (WAP Identity Module) is used for performing security functions, especially to store and process information needed for user identification and authentication. It is a tamper-resistant store for private keys, certificates and other items that may require a PIN for access or modification.

The WIM management dialogue consists of a PIN choice list and a WIM items list.

certificate. Other keys that are protected by the selected PIN but do not have an associated certificate are not shown in the WIM item list. This is the case when WIM PIN (PIN-G) is selected.

Note The PIN-G applies to the whole WIM and any items that do not have a different PIN. This means that no specific items on the WIM are linked to PIN-G.

You can change status of a PIN:

Enable PIN A PIN code that is enabled is requested for authorisation of an operation. To proceed with the operation you must enter the PIN code.

Disable PIN A PIN code that is disabled is not requested to authorise an operation to proceed.

To change the PIN code

1.Select the PIN you want to change from the choice list.

2.Select Change PIN.

If a PIN code has been blocked, you must unblock it before it can be used again. Select the PIN and select Change PIN.

You can select a PIN from the PIN choice list. The WIM items list changes content dynamically, displaying only the keys that are protected by the selected PIN and also have an associated

Control panel

163