Not for commercial use – Ericsson Inc.
&'(
Note! To receive a call that is restricted, you must enter your PIN. For
example, if Unstored is restricted, you must enter your PIN to
receive a call from a phone number that is not stored in your
Phonebook . If Ca ller ID is not suppo rted by your s ervic e provi der,
the only incoming call restrictions you can set are All and None.
1( Your phone has a PIN that you must enter to gain access to certain
functions, such as call restrictions and calling card numbers. The
factory-programmed code is 0000. You can change this code to
provide maximum security for your phone by using the Phone
Security submenu. If you forget your PIN, contact your service
provider for assistance.
Phone Lock restricts you from making calls, except emergency calls,
each time you turn the phone on. To unlock the phone, enter your PIN.
You will be prompted to enter your PIN to enter the Phone Lock
submenu.
*!.The Auto Key Lo ck submenu restricts you from using the keypad.
Auto Key Loc k activates after 25seconds of inactivity from the
Standby screen. The keypad remains locked until you do one of the
following:
•Remove and replace the battery.
•Receive a call (a fter the ca ll is compl eted, the k eypad is re turned
to the locked state).
•Press then to toggle Auto Key Lock.
Note! The Keypad Lock feature allows emergency number access (911)
even if the keypad is locked.
!"*The Answer Option submenu allows you to select one of the
following methods for answering calls:
• key – Press to answer calls.
•Any key – Press any key to answer calls.
•Auto Answer – Calls will be answered automatically after one
ring while in handsfree profile (this option is only visible in
handsfree profile).
!The Super Dial submenu allows you to dial a phone number stored
in phonebook positions 1 through 9 by pressing and holding the
numeric key corresponding to the phonebook position. The two
options for Super Dial are On and Off.
The Speed Dial submenu allows you to dial a phone number stored
in a phonebook position by entering the 1- or 2-digit position and
pressing . The two options for Speed Dial are On and Off.
**The Add Area Code submenu allows you to store an area code that
will be automatically added to the 7-digit phone number you are
dialing. Enter the area code, then select On to acti vate the feature.