Not for commercial use – Ericsson Inc.
-'( 
7 At the next Install New Modem screen, select Don’t detect my
modem, I will select it from a list then click Next.
8 At the next Install New Modem screen, click on Have Disk.
9 At the Install from Disk screen, select D:\ at Copy from
Manufacturer’s Disk (if your CD-ROM drive is not drive D, type
the correct CD-ROM drive designation).
10 At the Install New Modem screen, select Ericsson Voice Call
Dialer, then click Next.
11 Select the COM port to which your Ericsson mobile phone is
connected and click Next.
12 When Your modem has been set up successfully appears, click
Finish.
13 When your desktop returns, verify that your modem is properly
installed. From the Start menu, click on Settings, then Control
Panel. Double-click the Modems icon.
14 When the Modem Properties screen appears, click on the
description of your modem and click the Diagnostics tab. Note
the COM port to which your modem is assigned.
15 Click OK to proceed.
3
1 You cannot set up or maintain a data/fax session.
This will occur if you are inadvertently originating a voice call
when attempting a data/fax call or if the data/fax profile icon does
not appear on your phone’s display after you attempt to dial or
answer a data/fax call. To correct the problem, do the following:
aFrom the Start menu on your Windows desktop, click on
Settings, then Control Panel.
bDouble-click the Modems icon.
cSelect the General tab.
dSelect Ericsson TDMA Data/Fax Modem from the pull-
down list.
eClick Properties.
fClick General. Make sure that the maximum speed is set to
19200.
gSelect the Connection tab.
hClick Advanced.
iIn the Extra settings box, type the following:
+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;
jClick OK to return to the Connection tab.
kClick OK to return to Modem Properties.
lClick Close.
Note! If you are using an application that supplies its own box for
entering extra settings, then type the following command string
into that box as well:
+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;
2 You cannot originate a voice call.
aFrom the Start menu on your Windows desktop, click on
Settings, then Control Panel.
bDouble-click the Modems icon.
cSelect the General tab.
dSelect Ericsson Voice Call Dialer from the pull-down list.
eClick Properties.
fSelect the Connection tab.
gClick Advanced.
hType the following in the Extra Settings box of the the
Advanced Connection Settings window:
*ERVNOK=1
iClick OK to return to the Connection tab.
