Not for commercial use – Ericsson Inc.
&'( "
The two settings for this function are On and Off. The area code is
automatically added to the phone number you are calling when Add
Area Code is set to On. Add Area code does not add the area code
to phone numbers shown in the display by Caller ID, but you may
edit those phone numbers.
*!)0The Auto Prefix submenu allows you to store a 1- to 12-digit prefix,
which is automatically added to the dialed phone number. When you
dial a 4- or 5-digit phone number, the prefix is automatically added
to the phone number.
In order to send a number to office extensions, store the 3-digit
prefix in the Auto Pref ix submenu. You only need to dial the last 4
or 5 digits of the phone number.
For example, if you save 123 as the auto prefix and the function is
On, you can call 123-7654 by simply dialing 7654. The prefix 123 is
automatically added to the phone number after you press to dial
the phone number. The auto prefix is not added for phone numbers
longer than five digits.
The Calling Cards submenu allows you to store calling card
numbers to use for making long distance calls.
Note! You will be prompted to enter your PIN to enter the Calling
Cards submenu.
Setting Up Your Calling Cards
To set up your calling cards, make sure you have the Calling Card
Access Numbers (numbers provided by your long distance carrier)
and the Verification Numbers (numbers you must enter to allow the
calling card call to be completed).
To set up your calling cards, complete the following steps.
1 Press
from the Standby screen to access the main menu.
2 Press
or until the SETTINGS menu is highlighted.
3 Press
to select the SETTINGS menu.
4 Press
or until the Call Options submenu is highlighted.
5 Press
to open the Call Options submenu.
6 Press
or until Calling Cards is highlighted
7 Press
to open the Calling Cards submenu.
8 Press
or until Default Card, Card 1 Setup, or
Card 2 Setup is highlighted.
9 Press
to choose the highlighted selection.
You are prompted to enter your PIN and additional calling card
information.
To choose a card to be used as the default card when making calling
card calls, navigate to the Default Card submenu and select that
card.
Note! Only cards that have been set up will appear as options for
Default Card.
Making a Calling Card Call
1 Enter or recall the phone number you want to call.
2 Press and hold . The calling card number and the active calling
card are shown in the display.
3 Release the key after the number has been displa yed.
4 If you are using stops between numbers, you must press or
any number key to send the next sequence of numbers. If you use
pauses, the numbers are sent automatically after the specified
length of time chosen for the dialing delay.