Not for commercial use – Ericsson Inc.
* -'(
Disconnect your Ericsson mobile phone from your computer by
disconnecting the cable from your phone and the serial port from
your computer. You can also disconnect by pressing and releasing the
key. When your fax program is stopped or when your interface
cable is disconnected, your phone will exit Data/Fax profile and
return to the previously selected profile.
,(!+,To charge your phone’s battery with an Ericsson rapid or travel
charger during data operation, do the following:
1 Plug one end of the data cable into your phone.
2 Plug the other end of the data cable into the seri al port on your
computer.
3 Plug the charger cable into the bottom of the connector from your
data cable.
4 Plug the charger cable into the wal l outlet.
To charge your phone’s battery with an Ericsson desktop charger
during data operation, do the following:
1 Plug one end of the data cable into the back of your desktop
charger.
2 Plug the other end of the data cable into the serial port on your
computer.
3 Plug the charger cable into the bottom of the data cable connector.
4 Plug your charger cable into the wall outlet.
5 Insert the phone into the front compartment of your desktop
charger.
Note! When you remove your phone from your desktop charger, your
phone will exit Data/Fax profile and return to the previously
selected profile. To return your phone to Data/Fax profile, place
your phone in your desktop charger and restart your data access
software.