Sony Ericsson T290a 32

Call time	Before voice dialing
During a call, the duration of the call is shown in the	You must first turn on the name dialing function and
display.	record your voice commands.

	You can check the duration of your last call, outgoing
	calls and the total time.
	To check and reset the call time
•	Scroll to Calls, YES, Time & Cost,	YES, Call Timers
	and select an option.

•Select Reset Timers to reset the call time meter.

Voice control

With your phone, you can use your voice to:

•Voice dial – call someone by saying the name and number type.

•Re-dial the last dialed number.

•Answer and reject calls when using a handsfree kit.

•Change profile.

•Record or listen to sound recordings by using voice commands.

•You can save approximately 50 recorded words as voice commands in the 40 seconds available. This also depends on what is saved in the memory with other functions.

When recording, make sure you are in a quiet environment and try to use short words.

To turn voice dialing on and record number types

1.Scroll to Settings, Voice Control, Voice Dialing.

2.Select On. Now you are going to record a voice command for each number type you use with your

3.	Phonebook contacts, for example, “Home” or “Mobile”.
3.	Instructions appear. Press YES.
4.	Scroll to a number type and press YES.
5.	Add voice command? will appear. Press YES.

6.Lift the phone to your ear, wait for the tone and say the command that you want to record. The voice command is played back to you.

7. If the recording sounds OK, press YES to save the voice command. If not, press NO and repeat step 4.

8.Repeat steps 4 and 7 for each voice command you need. You also need to record voice commands for each contact name, for example, “John”.

To record a voice command for a contact name

1.Scroll to Settings, Voice Control, Voice Dialing, Edit Names, Add Voice Tag.

2.Enter the letter corresponding to the first letter of the

contact you want to find, YES.

Calling