Using the WAP browser
To start browsing
1.From standby, press and hold the 
key.
To reset your WAP Profile, do the following:
1.First select the WAP profile you want to use. Scroll to Web Services, YES, Options, YES, WAP Profiles, YES.
2.Then select one of the following:
•Open your homepage.
•Go to one of your bookmarks. Select Bookmarks, YES.
•Enter the address of a WAP site. Select Enter Address, YES, Add Address to enter a new WAP address or select one of the 10 latest entered addresses.
Tip: When you enter a WAP address, the normal http:/ / prefix is not needed.
To exit WAP and disconnect
•Press and hold NO or
•Press 
, select Exit.
Options when browsing
When you have started browsing, you can reach different browsing options by pressing 
.
•Home – Go to the homepage set for the current WAP profile.
•Back – Go back to the previous page.
•Bookmarks – Add the site you are currently browsing to your list of bookmarks, or see the list of bookmarks for the current profile.
•Enter Address – Enter the WAP address of a site you want to visit.
•Save Picture – Save a picture from the site.
•SendAsTextMsg – Send a text message with a link to the current WAP page to another phone.
•Send Link – Send a link to the current site to another phone.
•Reload – Refresh the contents of the WAP page.
•Exit – Disconnect and go to standby.
•Status – Display current status information, for example, profile, access type, connection time, data rate, security, address.
•Set as Homepg – Set the current site as the homepage of the WAP profile you are using.
56 Using Mobile Internet