White Paper V600

Service

Mode

Support

 

 

 

SET UP MENU

 

Yes

 

 

 

TIMER MANAGEMENT

 

Yes

 

 

 

OPEN CHANNEL

 

No

 

 

 

CLOSE CHANNEL

 

No

 

 

 

RECEIVE DATA

 

No

 

 

 

SEND DATA

 

No

 

 

 

GET CHANNEL STATUS

 

No

 

 

 

User Interaction with SIM AT

Display text

Text of up to 240 characters (120 UCS coded) is supported.

Text clearing times are 5-20 seconds and a 60-second time-out limit for the user to clear the text. ‘Key’ responses:

•‘Long Back’ – Proactive session terminated by user.•‘Back’ – Backward move in proactive session.Any other key clears the display if the command is performed successfully.

Get inkey

Prompt for a one-character input. Pressing ‘Ok’ without entering a character gives warning message “Minimum 1 character”. ‘Key’ responses:

•‘C’ clears current character.•‘Long Back’ terminates the proactive session.

•‘Back’ – Backward move in proactive session.

•‘OK’ – Command performed successfully.

Get input

Prompt for character input. The phone will refuse to accept further input when maximum response length is exceeded. UI Maximum Response lengths:

•Digits Only – 160 characters.

•SMS default alphabet characters – 160 charac- ters, or 1530 characters if concatenation is acti- vated.

•Hidden Characters (digits only) – 20 characters. ‘Key’ responses:

•‘C’ clears current character.

•‘Long Back’ terminates the proactive session.

•‘Back’ – Backward move in proactive session.

•‘OK’ – Command performed successfully.

Select item

Scroll to highlight item for selection. ‘Key’ responses:•Navigational key press down – Scroll down list.•Navigational key press up – Scroll up list.•Long ‘Back’ terminates proactive session.

•‘Back’ – Backward move in proactive session.

•‘OK’– Command performed successfully.

Send short message

Default message “Sending message, please wait” can be replaced for the Alpha Identifier text, or suppressed completely if a null text is provided. Default responses are “MESSAGE FAILED” or “MESSAGE SENT”. ‘Key’ responses:

•Long ‘Back’ or ‘Back’ ends the proactive ses- sion.

Set up call

If the ME is on a call when the command ‘Set up Call’, ‘putting all other calls on hold' is sent, the user will see the text 'Setting up a call current call will be held'. If ‘OK’ is pressed the current call will be put on hold and the new call set up. If the ME is on a call when the command ‘Set Up Call, disconnecting all other calls’ is sent, the user will see the

53

August 2005