To remove the charger1Charge your battery until the battery icon indicates a full charge.2Tilt the USB charger connector upwards to remove it.Note:

1If there are two USB cables in the kit (USB cable for charging and USB cable for data transferring. See the illustrations as below), then the USB cable for charging is only intended for charging your phone. Do not use it for transferring data.

The USB cable for the USB charger is only intended for connection to the AC adapter to charge your phone. It must not be used for connection to a PC. It can only be used for charging your phone. Never use it for charging accessories.

2If there is only one USB cable in the kit, it is intended for charging your phone as well as transferring data.

3If there is only one USB cable for the USB charger in the phone kit, this USB cable is only intended for charging your phone.

4Sony Ericsson strongly recommends that you use only Sony Ericsson branded original batteries, the part of power supply device in accordance with YD/T 1591-2006 specifications of Communications Industry Standards of P. R. China and the USB cable supplied with your phone to charge the phone. The use of third-party products may decrease the performance of your phone and/or pose a risk to your health or safety.

You can charge the battery for more or lessthan 2.5 hours. Interrupted charging will not damage the battery.

Performance depends on temperatures, signal strenth, usage patterns, features selected and voice or data transmissions. The stand-by time for this battery is up to

385 hours.

Use only Sony Ericsson branded original batteries intended for use with your mobile phone. If you use other batteries you may not be able to charge your phone.

USB cable for charging

USB cable for transferring

10Getting started

This is the Internet version of the User guide. © Print only for private use.