I cannot use picture messages on my phone

You must set an MMS profile and the address of your message server. If no MMS profile or message server exists, you may receive the settings from your network operator or at www.sonyericsson.com/support.

To select an MMS profile

1From standby select Menu > Messaging > Settings > Picture message > MMS profile.

2Select a profile.

To set the message server address

1From standby select Menu > Messaging > Settings > Picture message.

2Scroll to MMS profile and select Edit.3 Select Options > Edit.

4 Scroll to Message server and select Edit. 5 Enter the address and select OK > Save.

The phone does not ring or rings too softly

Make sure that Silent mode has not been set to On. See To turn off the ringtone on page 67.

Check the ringtone volume. See To set the ringtone volume on page 67.
Check the profile. See To select a profile on page 66.Check the divert call options. See To divert calls on page 43.

The phone cannot be detected by other devices using Bluetooth wireless technology

You have not turned the Bluetooth function on. Make sure the visibility is set to show phone. See To turn the Bluetooth function on on page 33.

I cannot synchronise or transfer content between my phone and my computer, when using the USB cable.

The cable or software that came with your phone has not been properly installed. Go to www.sonyericsson.com/support to read Getting started guides which contain detailed installation instructions and troubleshooting guides.

I have forgotten my code memo passcode

If you forget your passcode, you must reset the code memo. This means that all entries in the code memo are deleted. The next time you enter the code memo, you must proceed as if you are opening it for the first time.

Troubleshooting 73

This is the Internet version of the User guide. © Print only for private use.