Smart zoom

When higher frame sizes are selected, the camera will automatically drop to a lower frame size when zooming in order to prevent distortion of the captured picture. The points at which the frame size is reduced is dependent on the current frame size set and are marked on the zoom bar.

Changing the camera settings

Press to see how you can use the keypad keys as shortcuts for some of the most frequently used settings. Press the key again to remove the description.

Most of the settings you make will remain until you change them, even if you have switched the camera or your phone off.

To change the settings

1Press the Jog Dial to open the list of settings.

2Rotate the Jog Dial to move through the list and see the options for each setting. Press the Jog Dial to select a setting to change.

3Rotate the Jog Dial to scroll through the options and press it to select the required option for the setting.

4Press the back button to return to camera mode.

You can also select Settings and use

the stylus to change the settings.

The settings will vary depending on whether picture or video mode is selected. The settings are:

Shoot mode – select what sort of pictures to take. Burst takes four pictures in rapid succession.

Frame size – select what picture or video size to use.

Auto focus – allows the camera to automatically focus the camera lens.

Select Macro for extreme close- ups.

Video file size – select Messaging to limit the length and size of video clips (when recording) so that they can be sent as picture messages.

White balance – select an option that matches the lighting conditions.

Imaging 39

This is the Internet version of the User's guide. © Print only for private use.