17
Transducer

Setup 3

If an on-stage guitarist wishes to have his cabinet sound, the signal should be routed to his
box via the Transducer Speaker Thru. In this c ase the amp signal power is reduced by 8 dB
enroute to the box; here satura tion (that is, power amp dis tortion) begins to o ccur at moderate
listening levels.
The two separate Transducer Lin e Outputs may be used simultan eously to feed both an FOH
mixer and monitor mixer.

Setup 4

If the guitarist does not ne ed the 8 dB Speaker Thru signal reduction, he may connect both
the guitar box and Transducer simultan eously with the guitar amp loudspeaker outputs
(assuming this is an amp option).
IMPORTANT ADVICE: In such cases the guitar amp impedance must be reduced by half. For
example: In connecting to the Transducer (8 ohms) and guitar box rated at 8 ohms, the guitar
amp must be set up at 4 ohms. The two separate Transducer Line Outputs ma y be used to
feed both an FOH mixer and moni tor mixer simultaneously.
Setup Examples
4FUVQ
1PXFS*OQVU 4QFBLFS5ISV
1" .POJUPSJOH
E#
-JOF0VUQVU -JOF0VUQVU
4QFBLFS0VU
'0)
.JYFS
.POJUPS
.JYFS

4FUVQ

1PXFS*OQVU
1" .POJUPSJOH
-JOF0VUQVU -JOF0VUQVU

'0)

.JYFS

.POJUPS

.JYFS

4QLS0VU 4QLS0VU
Live