Computer Input
Auto PC AdjustmentAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.
Direct Operation | Remote Control |
The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.
AUTO PC button
Menu Operation
| Auto PC Adj. |
1 | Press the MENU button to display the |
| Menu. Use the Point 78 buttons to move the red |
| frame pointer to the PC Adjust Menu icon. |
2 | Use the Point ed buttons to move the red frame |
| pointer to Auto PC Adj. and then press the SELECT |
button twice.
To store adjustment parametersThe adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode
✔Notes:
•Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required
•The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p.30), or when the signal is coming from the
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer to Auto PC Adj. and press the SELECT button.
“Please wait...” appears while the Auto PC adjustment is in process.
31