Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

1

Press the MENU button to display the On-Screen

 

Menu. Use the Point 78 buttons to move the red

 

frame pointer to the Input Menu icon.

2

Use the Point ed buttons to move the red arrow

 

pointer to Video and then press the SELECT button to

 

display the Source Select Menu.

3

Move the pointer to the desired source and then press

 

the SELECT button.

 

 

When selecting Auto, the projector automatically

 

Auto

 

 

detects incoming video signal, and adjusts itself

 

 

 

 

to optimize its performance. The projector selects

 

 

connection in the following order:

 

 

1. S-video

 

 

2. Video

 

When video input signal is connected to the

Video

 

 

VIDEO jack, select Video.

 

 

 

When video input signal is connected to the S-

S-video

 

 

VIDEO jack, select S-video.

 

 

Notes:

•Computer 2 is not displayed when the COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal is set as Monitor out. (p.49)

•Wired, Wireless, and Memory viewer are for the Network function. See the owner’s manual “Network Set-up and Operation” and owner’s manual of Memory viewer (optionally available).

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.49).

Top Control

 

INPUT button

 

 

 

INPUT button

 

POWER

WARNIN

Computer 1 (Analog)

 

MENU

INPUT

ON

 

-

 

 

 

OFF

 

 

Computer 1 (Digital)

 

SELECT

 

 

 

 

 

 

 

Computer 2

 

 

 

Video

 

 

 

Wired

Remote Control

 

 

 

 

VIDEO button

Input Menu icon

Input Menu

Move the pointer to

Video and press the

SELECT button.

VIDEO

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

38