How To Control The Monitor
1. Power On/Off
|
|
| MENU | MODE | MPWR |
SD | USB | AV2 | SD | USB | AV2 |
<Unit>
To power on the unit, press POWER button on the monitor; or press POWER button on the remote control.
MENU | MODE | MPWR |
SD | USB | AV2 |
To power the off unit, press MPWR or PWR on the monitor; or press POWER button on the remote control.
2. Mode Change
(1) Press any place on the monitor screen with your finger softly ,and you will see the MODE button on the monitor .
2
|
|
| PLAY |
| VOL + |
|
| 1 | STOP |
| VOL- |
|
|
|
| ||
|
|
| PREV |
| MODE |
|
|
| NEXT | MENU | PWR |
SD | USB | AV2 | SD | USB | AV2 |
(2) Press the MODE button to change an Input
PLAY |
| VOL + |
|
|
|
STOP |
| VOL- |
|
|
|
PREV |
| MODE |
|
|
|
NEXT | MENU | PWR | MENU |
| MPWR |
|
|
|
| ||
SD | USB | AV2 | SD | USB | AV2 |
6
Installation
Product installed
1.Remove the existing headrest from the seat.
2.Adjust the posts of the new headrest to fit the holes in the seat where the headrest will be installed. The post can be moved together or apart grasp one post in each hand, move the posts in opposing directions (like they were walking) while pushing them toward each other or away from each other.
3.Insert the cable in the proper hole. Insert the posts into the holes in the seat and carefully work the headrest into position. Make sure the cable is not pinched.
4.Run the cable down the seat and out to the location of the video source unit (such as a DVD player).
5.See the picture on the right and you can adjust the distance between the tubes to required space(pole width adjustments 4 
~ 8.2 
) .
How to use the Adapter tubes
SDUSB
Since the spacing of the mounting holes can vary on different veicles we supply two adapter tubes. Use these tubes when the headrest mounting holes in your seat are too large for the posts of the headrest monitor.
35
