TROUBLESHOOTING
Problem: No Power. No sound
Check power supply connection.
Check position of input controls: SELECTOR / TRIM / LEVEL / EQ CUT.
Check input connections.
Check crossfader position.
Check output connections.
Check and adjust input TRIM pads.
Problem: Faders work the wrong way round.
Check fader reverse switches on front panel.
Problem: DJ Mic causes feedback from booth speakers.
Engage mic defeat button on rear con. panel.
Problem: Turntable volume is very low.
Check that the phono/line switch on the rear panel is selected. See page 18, item 5.
Problem: Buzzing from turntable.
Check analog player ground connections.
BPM engine will not read track
Check/reset BPM range
Check mixing desk levels are at 0 or above on the input meters
Unable to hear effect
Check MIX fader setting
Check ISOLATOR filter settings
Is the right effect activated?
Check input level fader control
49
