System setup menu
1.Press the SETUP button on the RC to display the system setup menu.
2.Use LEFT/RIGHT cursor buttons on RC to select the desired menu: System setup, Language setup, Video setup.
3.Press ENTER to enter it.
4.Use the UP/DOWN cursor buttons to select the needed setting.
5.Press RIGHT to enter the setting adjustment sub window.
6.Press the UP/DOWN cursor buttons to select the option of the setting and press ENTER to confirm it.
System setup
TV system
This unit is suitable for all kinds of TV systems. You can select: Auto: the TV system is auto switched according to the disc system. NTSC: this system is used in USA, Taiwan, Japan etc.
PAL: this system is used in China, Europe, Hong Kong etc.
Screen saver
When the function is ON if the unit hasn’t been used for several minutes the screensaver will appear on the screen.
TV type
4:3 PS: When the unit connects to the normal TV set, the
4:3 LB: When the unit connects to the normal TV set, the
16:9: Use this item when the unit is connected with the wide screen TV set.
Password
Here you can change the password. Insert your old password or 0000 (the general one). Insert the new password. Insert it again. Press OK button to save the new password.
Rating
The rating level is for parents to control playing content and protect your children from violence and erotic. The disc, the level of which is higher than the setting level cannot be played. To change the parental control level you should enter the password (your or the general one: 0000).
Default
Reset to the initial factory setups
22
