Soundstream Technologies G7170 owner manual Crossover Installation

Crossover Installation

1.The crossover should be mounted in a dry, moisture free location. Never install the crossover in the door where it can be damaged by water and moisture. The crossover can be installed in the door panel as long as there is an undamaged vapor barrier.

2.There are three sets of connections on the crossover. The Input terminals should be connected to the source of the signal (radio or amplifier). The woofer terminals should be connected to the midbass driver. The tweeter terminals should be connected to the tweeter. The tweeter volume can be set at -3dB, 0dB and +3dB. Ensure that the negative polarity wire of the tweeter is the one used for setting the tweeter volume level. Make sure that the polarity on all connections is correct.

R1	R2		R3		R4
	C1
		C2	C3
L1					L2
+IN	PUT- WF+	WF-	TW+ -3dB	0dB	+3dB