Soundstream Technologies G7170 owner manual Tweeter Installation, Features

Tweeter Installation

Mounting hardware contained in the packaging will allow a surface or flush mount installation. The tweeter should be mounted on the same plane and within 6 inches of the mid-bass driver to avoid any phase shift. Also, as the frequencies that the tweeter reproduces are very directional, avoid placing the tweeter in a position that will be obstructed either by objects in the vehicle or by passengers. As with the mid-bass driver, if a factory tweeter location is available, it is recommended that it be used. If it is necessary to cut a hole to mount the tweeter, then be careful to find a location that will have enough depth and will not interfere with any moving parts in the vehicle.

Flush Mounting: When flush mounting the tweeter, it will be necessary to use the tweeter cup, rear wing bracket. Mount the rear wing bracket to the mounting cup with the supplied screw, insert the tweeter into the cup and secure with the same screw used to mount the wing bracket. Push the tweeter assembly into the rear of the vehicle’s tweeter opening and fasten assembly to the opening by twisting on the flush mount ring from the front.

Congratulations on your purchase of Soundstream’s Picasso component speaker system. The Picasso component system represents Soundstream’s design approach to creating musical reproduction with the richness and clarity while maintaining cost effectiveness. Only the best materials and production techniques were used to create an exceptional line of component system speakers. We hope you will enjoy your Picasso components for many years to come.

Features:

•Stamped steel basket with brushed finish

•Woven glass fiber spruce pulp laminate cone

•NBR rubber surround

•Precision machined and matched motor assembly

•Custom embossed protective magnet boot

•1” Copper voice coil on aluminum former with reinforced neck joint

•1” Teflon silk dome tweeter with resin coating

•DC tweeter protection circuit

•12dB low pass with presence switch

•18dB high pass with 3-way sensitivity switch