GRANITE180.6
u | u UndersIde View u |
1.+I2V - Connected to fuse or circuit breaker, then battery’s positive post.
2.Ground - Main ground connection. Bolt to a clean chassis ground in the vehicle.
3.Remote - Remote
4.LED - Indicates amplifier power on.
5.Speaker Output Connections - Channels (1 + 2 
)
6.Input Level - Variable from 1OOmV to 2.5V (Channels 1 + 2).
7.Inputs - Standard
8.Speaker Output Connections - (Channels 3 + 4)
9.input level - Variable from 100mV to 2.5V (Channels 3 + 4).
10.Inputs - Standard
11.Speaker Output Connections - (Channels 5 + 6)
12.Input Level
13.Inputs - Standard RCAtype connectors (Channels 5 +6). Use only right channel for mono.
14.[underside] Channels 5 + 6 Mono/Stereo (input 5 + 6) / Stereo (input 3 + 4) Switch
MONO position for single channel operation. (Only right channel is active in Mono) Use “STEREO5+6” for RCA inputs 5+6. Use “STEREO3+4” for input from RCAs 3+4.
15.[underside] Channels 5 + 6 Crossover - Full range or high pass (150Hz,12dB/octave).
16.[underside] Channels 3 + 4 Mono/Stereo (input 3 + 4) / Stereo (Input 3 + 4) Switch
MONO position for single channel operation. (Only right channel is active in Mono) Use either STEREO input position with RCA inputs from Channels 3 + 4.
17.[undersidejchannels 3 + 4 Crossover - Full range or high pass (150Hz, 12dB/octave).
18.[underside] Channels 1 + 2 Mono/Stereo (input I+ 2) / Stereo (input 3 + 4) Switch
MONO position for single channel operation (only right channel is active in Mono). Use “STEREO1+2” for RCA inputs 1+2. Use ‘STEREO 3+4” for input from RCAs 3+4.
19.[unde&de]Chann& 1 + 2 Crossover - Full range or low pass (75Hz, 12dB/octave).
20.[underside] Main Fuse - Main power supply fuse, replace only with same value.
5
