What is the recommended gauge for power and ground cables for the RUBICON Class A amplifiers?

For maximum output, use high quality, low-loss power and ground cables of at least 4 gauge. The amplifiers will accept up to 4 gauge cables.

Where should the fuse or circuit breaker be located for the RUBICON Class A amplifiers?

The fuse or circuit breaker must be located within 18 inches of the battery to prevent a fire in the event of a shorted cable.

Sample Wiring Diagram, Remote Turn-On | Soundstream Technologies Picasso

Q: How do I connect the remote line to my Soundstream Technologies Picasso stereo amplifier?

You can connect the remote line to the turn-on lead from the source unit. When +12 Volts is received, the amplifier will turn on.

( INSTALLATION STEP 3 ]

REMOTE TURN-ON

Connect the “Remote” line to the turn-on lead from the source unit. When+12 Volts is received, the amplifier will turn on.

POWER AND GROUND

To ensure maximum output from your RUBICON Class A amplifier, use high quality, low-loss power and ground cables and connections. The RUBICON Class A amplifiers will accept up to 4 gauge power and ground cables. Deter- mine from the chart below the minimum gauge power and ground wire for your application.

up to IO’		up to 20’

4 or 8	gauge	4 or 8 gauge

4 or 8	gauge	4 or 8 gauge

CIRCUIT BREAKERS AND FUSES

EXTERNAL

Like all audio components, the RUBICON Class A amplifiers must be fused near the battery. A fuse or circuit breaker must be located within 18” of the batterv. This will prevent a fire in the even of a shorted cable. See the chart below to determine the correct fuse value.

INTERNAL

The RUBICON Class A amplifiers are fused with an automotive-type fuse. In the even of a blown power supply fuse, replace with the correct value fuse found in the chart below. Never replace the fuse with a higher value than what is supplied. This may result in amplifier damage and will void the warranfy!

RUB/CON Amplifier Fuse Values

			Amplifiier Fuse

	tviiflo		25	amp	automotive		30	amp

I	&NOR	I	25	amp	automotive	I	30	amp

SIGNAL CABLE

Use a high quality cable that will be easy to install and has minimal signal loss to guarantee optimum performance.

SPEAKER CABLE

The RUBICON Class A amplifiers will accept up to 8 gauge speaker cable. Use a high quality, flexible, multi-strand cable for best performance and longevity.