TOP VIEW | FRONT VIEW | BOTTOM VIEW |
6
KEY TO CALLOUTS
1. Power LED - Indicates amplifier power.
2.Clip indicators - Channels 1 & 2; Indicates the signal output level is too high and the output stage of the amplifier is clipping.
3.Left Channel Balanced/Unbalanced input Selector - Channel 1; Select
“BALANCED” to use the 6 pin Balanced signal input. Select “UNBALANCED” to use the RCA signal inputs.
4.Right Channel Balanced/Unbalanced input Selector - Channel 2; Select “BALANCED” to use the 6 pin Balanced signal input. Select “UNBALANCED” to use the RCA signal inputs.
5.Clip Indicators - Channels 3 & 4; Indicates the signal output level is too high and the output stage of the amplifier is clipping.
Channels 3&4 Input Select - Selectable inputs from internal (from channels l&2) or external (from channels 3&4 local balanced or RCA Inputs).
Left Channel Balanced/Unbalanced input Selector - Channel 3; Select “BALANCED’, to use the 6 pin Balanced signal input. Select “UNBALANCED” to
use the RCA signal inputs.
a.Right Channel Balanced/Unbalanced input Selector - Channel 4; Select “BALANCED,, to use the 6 pin Balanced signal input. Select “UNBALANCED” to use the RCA signal inputs.
9.RCA Inputs - Channels 3 & 4; Right and Left channel RCA (Unbalanced) inputs.
10.Balanced Signal input Connector - Channels 3 & 4;
11.Input Levels - Channels 3 & 4; Independent Left and Right input level controls.
12.Speaker Connection Terminal - Speaker connections for Ch’s 3 & 4.
13.RCA Inputs - Channels 1 & 2; Right and Left channel RCA (Unbalanced) inputs.
14.Balanced Signal input Connector - Channels 1 & 2;
15.input Levels - Channels 1 & 2; Independent Left and Right input level controls.
16.Speaker Connection Terminal - Speaker connections for Channels 1 & 2.
17.REMOTE - Remote
ia. GND - Main ground connection. Bolt to a clean chassis point in the vehicle,
19.+12V - Connected to a fuse or circuit breaker, then to the battery’s positive terminal
FUSE - Main power supply fuse. Warning: Replace only with the same value fuse!
Stereo/Bridged Mono Switch - Channels 1 & 2; Select “Bridge” for bridged mono operation (use right channel input). Select “Stereo” for
Stereo/Bridged Mono Switch - Channels 3 & 4; Select “Bridge” for bridged mono operation (use right channel input). Select “Stereo” for