Soundstream Technologies SA 164 owner manual v to Callouts, SA.164, I, Top View partial, Side View

SA.164

I

-/

I

i HANDCRAFTED IN U.S.A.

Top View (partial)

67 8 9 10

Side View

.f-Y	/
i		15
/\ ii’
		\
CHANNELS 1 & 2		MAIN FUSE

LOW PAS m FULL RANGE

.14

I- i 11

Underside View

6

v to Callouts

1.+I 2V - Connected to fuse or circuit breaker, then battery’s positive post.

2.Ground - Main ground connection. Bolt to a clean chassis ground in the vehicle.

3.Remote - Remote turn-on input from the head unit. Accepts +12V.

4.LED - Indicates amplifier power on.

5.Speaker Output Connections - Channels 1 & 2

6.Input Level - Channels 1 812; variable from IOOmV to 2.5’.

7.Inputs - Channels 1 & 2; right and lefl channel inputs; only right channel input used in “Mono” mode.

6.Speaker Output Connections - Channels 3 & 4

9.Input Level - Channels 3 & 4; variable from IOOmV to 2.5V

10.Inputs - Channels 3 & 4; right and lefl channel inputs; only right channel input used in “Mono” mode

11.[underside] Stereo/Bridged Mono/Internal Switch (ch 3 & 4) - Select “Mono” for bridged operation (use only right channel input or stereo position for 2-channel Stereo or Mixed Mono operation). “Internal” allows you to use the inputs to channels 1 & 2 to feed channels 3 814.

12.[underside] Amplifier Crossover Switch - Channels 3 & 4; select high pass or full range operation.

13.[underside] Stereo/Bridged Mono/Remote Switch - Channels 1 8 2; select “Mono” for bridged operation (use only right channel input or stereo position for 2-channel Stereo or Mixed Mono operation.

14.[underside] Amplifier Crossover Switch - Channels 1 & 2; select low pass or full range operation.

15.[underside] Main Fuse - Main power supply fuse. Replace only with same fuse value.