Source Technologies, LLC ST9620 Secure MICR Printer User’s Guide
47
The Audit Trail Report feature provides a report of the printer’s MICR printing activity.
The printer must have flash memory to utilize this option. Details of each flagged check
record sent to the printer are provided since the last audit report was purged from flash
memory.
Report Details
A record (check) must be bounded by a start of record command and an end of record
command. Within each record, fields to be included in the Audit Trail Report must be
flagged. The printer stores each record in flash memory. After the check is successfully
printed, its record is designated as a successfully printed document in flash.
The report is built by printing each of these check records as a line item. At the end of
the report, an exception report is generated which highlights any records received by the
printer but not successfully printed.
Each record (check) has a maximum of seven fields with a total of 146 bytes. Two of
the flagged fields, SQ1 and SQ7 are Audit Report fields only. They are not printed
on the MICR document. Flagging other fields for inclusion in the Audit Report does not
effect how they print on a check.
Audit Trail Menu
The MICR menu contains a section for the Audit Trail options. Menu options are Audit
Location, Record Sorting, Overlay, Sum Field 4 and Print Report.
Audit Location
Choose to store audit data on flash or disk. The display will show “No Device” if neither
is installed. Flash is the default if both are present.
Audit Record Sorting
This enables sorting of the report by the first 20 digits in the MICR line field. In an
unsorted report the records are in the order in which they were printed.
Overlay
To assist in reading an Audit Trail report you have the option of using a form overlay.
This overlay can provide lines, boxes and shading for a more user friendly report format.
The Audit Trail Report overlay can be stored in printer flash or RAM. We recommend
storing it in flash. It must have an ID of 5001. It is enabled by accessing the MICR menu
via the printer’s front panel. Select Audit Menu > Overlay. This overlay will now be
merged with the record details every time the Audit Trail Report is printed.
Sum Field 4
The values in field four of the Audit Trail Report can be added together with the total
provided at the end of the report. This feature is activated through the MICR menu.
Select Audit Menu > Sum Field 4.
Audit Trail Reports | 8