Source Technologies ST9620

Source Technologies, LLC ST9620 Secure MICR Printer User’s Guide

The commands in Figure 8.1 in order of appearance (Audit Report fields shown in

bold).

&&??&% Hex transfer enable.

&%STFPASSWORD$ Password command.

&%SMCP0001$ MICR definition command with the count set to one.

&%SAR$ Activates Audit Report recording.

&%STP10001$ Unlock flash resource number 10001.

&%STP00200$ Unlock flash resource number 200.

&%1B26...3358$ PCL sequence in hex which sets the page format and

enables macro number 10001.

&%SQ1200$200 Stores the vendor number 200 in the first position of

the Audit Report. Note that this field will not be sent to

the page to be printed. Here we send the field again so

that it will print.

&%1B$(s1p16v0s3b4148T PCL sequence which changes the font to Univers 16

point. After the check serial numbers prints (100), the

printer is returned to its default font with the following

command.

&%1B$(3@ PCL command to return to default font.

&%SQ6October 5, 2005$ Stores the date in the sixth position of the Audit

Report.

&%SMF$2014.44~ Prints Secure Font command. NOTE: Tilde (~) is

command terminator.

&%1B$(s0p12h10v1s0b4099T PCL command to change the font to Courier 12 pitch

Italic. See print PCL Fonts on the Front Panel under

the test menu for a printout with the call commands.

&%1B$(3@ PCL command to return to the default font.

&%SQ4$2104.44~ Stores the amount in the fourth position of the Audit

Report.

&%SQ3Vendor Systems $ Stores the payee, Vendor Systems, in the third

position of the Audit Trail report.

&%1B$(200X! PCL command to print font number 200. In this

example font 200 is a signature previously loaded into

Audit Trail Reports | 8