Hardwa re Insta llation SY-KT880 DRAGON 2 V2.0
18
2. Make sure that the retaining clip is in this position before trying to install
the heatsink. Notice that the clip is not symmetrical. The long end always
attaches to the top of the socket (the end that reads “Socket 462”), while
the short end engages the bottom of the socket. No matter whic h heatsink
is used, the clip is always installed in the same manner.
3. To install this clip, push firmly only on the end of the clip. To install the
clip, typically requires 12 to 24 pounds of force.