105
1. Press ‘Enter’ key to activate this item. An ‘R’ flash cursor appears at the
‘Drive Select Menu’ for the user to choose the array to rebuild.
2. BIOS shows the source and destination drives and waits for confirmation
to rebuild. Press ‘Y’ to start rebuild process.
3. Process status bar shows up during the rebuild process.
2.2.8 Select Boot Drive
1. Press ‘Enter’ key to activate this item. A ‘B’ flash cursor appears at the
‘Drive Select Menu’ for the user to choose the boot drive.
2 .Press ‘Enter’ or ‘Space’ Key to finish selection.
Note: The boot drive affects how the operation system treats the order of
other drives. Take the above BIOS screen as an example, if Channel 3
is the boot drive, the operation system will use the order of Channel 3
Master, Channel 1 Master, Channel 1 Slave, Channel 4 Master
consecutively.