Connecting to other components (continued)
Connecting the 
connectors
If you are using other ONKYO components equipped with 
connectors, you can control these components using the amplifier’s remote controller.
Before connecting
•The amplifier must be connected in the 
system hookups for 
control operations.
•Each component has two 
connectors. There is no difference between these connectors.
•The components may be connected in any order.
•The hookups on the previous page are necessary independently of the 
system hookups.
The illustration below is an example of a 
hookup. With these hookups, you can operate the CD Synchro Recording; when recording a tape with this unit from the CD player, you can start recording automatically (while the unit is in recording standby) at the same time as you play the CD (see “CD Synchro Recording” on page 14).
For CD Synchro Recording, at least the unit, amplifier, and CD player must be connected with the 
connectors.
Tuner
Amplifier
This unit
CD player
REMOTE
CONTROL
remote control cable (optional)
Supplied 
remote control cable
remote control cable (optional)
Note
An 
remote control cable equipped with a 1/8 in. (3.5mm) diameter miniature two- conductor phone plug is included with this unit and with every compact disc player and tuner
that bears the 
mark.
Connecting the AC power cord (mains lead) to the wall outlet (the mains)
INPUT OUTPUT REMOTE
(REC) (PLAY) CONTROL
L
R
Note
AC power cord (mains lead)
| STEREO CASSETTE TAPE DECK |
|
|
| DOLBY NR |
| CASSETTE LOADING MECHANISM | REV. MODE |
STANDBY/ON |
| REC LEVEL |
| ALBUM | |
STANDBY | CD DUBBING |
|
| COUNTER RESET | |
|
| |
| FADE |
|
The STANDBY indicator lights
If you connect the AC power cord (mains lead) to the AC outlet of another component, the component’s AC power cord (mains lead) must be connected to the wall outlet (the mains) to supply power to the unit. If the component has a main power switch, it must be set to On.
8
