Connections
Connecting to the ONKYO Separate Collection Series components
This section introduces you to the other ONKYO Separate Collection Series system components and their convenient system functions. For the actual connecting instructions and detailed information, please refer to the Instruction Manual of the Integrated Stereo Amplifier
The following ONKYO Separate Collection Series components are commercially available:
•
•
•
•
•
•
•
The
Note that the available components may vary according to the area.
Combination use of the unit with the above system components enables you to operate the following convenient functions:
•Auto Power On
–You can turn on the amplifier by pressing the STANDBY/ON button on one of the system components. (The amplifier's POWER switch must be set to ON.)
–You can turn on all the system components at the same time by pressing the STANDBY/ON button on the amplifier. (The amplifier's POWER switch must be set to ON.)
You can turn off each component not in use independently afterwards.
•Direct Change
Press the following button on the component you want to operate to switch the amplifier’s input selector automatically to that component:
–The play button on the unit, CD player, or MD recorder, or
–The PRESET / buttons on the tuner.
•Remote Control Operation
All the system components can be operated using the remote controller supplied with the A- 905TX or
•Program Timer
You can operate timer playback and recording using
•Sleep Timer
You can fall asleep to a music/radio program using the timer (refer to the Instruction Manual of the
•CD Dubbing
Simple CD dubbing with this unit is possible with the pressing of a single button (see page 16).
•CD/MD Synchro Recording
When using this unit to record a tape from the CD player or MD recorder, you can start recording automatically (while the unit is in recording standby) at the same time as you start playing a CD or MD (see page 20).
Note
When connected to the
6