Onkyo instruction manual K-505TXThis unit

CD/MD Synchro Recording with ONKYO Separate Collection Series

K-505TX (This unit)

C-705TX (CD player) is used for the illustration example.

	STEREO CASSETTE TAPE DECK
		DOLBY NR
	CASSETTE LOADING MECHANISM	REV. MODE
STANDBY/ON		REC LEVEL
	ALBUM
STANDBY	CD DUBBING
		COUNTER RESET
	FADE

Display

REV. MODE

COMPACT DISC PLAYER

TR-1

DUAL OPTICAL OUTPUT

STANDBY/ON

STANDBY

DISPLAY

Before starting

The shadowed steps are operations with the CD player or MD recorder, or amplifier.

The unit must be connected to A-905TX (Integrated Stereo Amplifier), and C-705TX (CD Player) or MD-105TX (MD recorder) for these operations. (See “Connecting to the ONKYO Separate Collection Series components” on page 6.)

1 Press STANDYBY/ON on the amplifier, if the unit is not turned on.

All the system components will be turned on.

STANDBY/ON

2 Insert a cassette with its erasure prevention tabs in place, following step 1 in “Playing a tape” on page 9.

See “Preventing an accidental recording” on page 15.

Note

If you start recording the tape from the beginning, wind the tape slightly forward with a pencil (see page 22 for illustration) before inserting the cassette. This is because the sound cannot be recorded on the leader.

3 Press REV. MODE to select the reverse mode.

Each press changes the indicator in the

display; or .

REV. MODE

•When is lit

The unit records both sides of the tape and stops.

•When is lit

The unit stops after recording one side of the tape.

4 Insert a CD into the CD player or insert an MD into the MD recorder, and start playing for recording adjustment.

5 Press and hold , then press or (to record on the reverse side) to decide the recording direction.

The unit is set to recording pause.

or

20