Sony 930, 950, 900 manual 2Operation Panel in use with HD Equipment, 3Connector Panel

7	C AUTO button
	Press and light the button to automatically adjust
	the iris according to the amount of input light

(Auto Iris). If you press the button when lit, it goes dark and manual iris adjustment is enabled.

Note

If the subject being used as the reference for automatic adjustment is lost while operating a camera having the skin tone auto iris function, the skin tone auto iris stops functioning, and the iris value at that time is maintained. The AUTO button then flashes. In this condition, not only is the iris not automatically adjusted but also it cannot be changed manually. When you wish to change the iris, turn Auto Iris off. If Auto Iris is kept ON, the skin tone auto iris will start functioning when the subject for reference is resumed.

Right two buttons in the upper row (OFF when the button is lit)

SD MATRIX OFF: To turn on/off the linear matrix in down converting

SD DETAIL OFF: To turn on/off the SD contour compensation function in down converting

Fourth button from the left in the middle row (ON when the button is lit)

LOW KEY SAT: To turn on/off the low key saturation function (linear matrix for dark areas)

Menu operation block/1 MODE (mode select) buttons

The uppermost MODE button in the menu operation block functions as the FUNCTION button both in HD and SD camera systems. Use the unit with the supplied label attached as shown below.

MODE

7-8-2Operation Panel in use with HD Equipment

Camera/CCU function ON/OFF buttons

When this unit is used in an HD camera system (HDC- 700/750/700A/750A/900/950/930, HDW-700/F900, HDCU-700/900/950), another three camera/CCU function ON/OFF buttons become effective. Use the unit with the labels for an HD system (supplied) attached to the appropriate positions.

KNEE	DETAIL	LVLDEP GAMMA CHROMA MATRIX				SD MATRIX SD DETAIL
OFF	OFF	OFF	OFF	OFF	OFF	OFF	OFF
KNEE	KNEE		LOW KEY			MONO	COLOR
APERTURE SAT			SAT			COLOR CORRECT
5600K	AUTO	SKIN	DETAIL	SATURATION CONTRAST BLACK		CHARACTER
	KNEE	DETAIL	GATE		GAMMA

FUNCTION buttons:

FUNCTION Selects Function menu to control various camera and CCU functions.

MULTI

CARD

CONFIG

MAINTENANCE

FILE

PAINT

7-8-3Connector Panel

1 POWER switch		3 CCU/CNU REMOTE connector
	2 AC IN connector		4 AUX REMOTE connector
		REMOTE	AUX
		CCU/CNU
POWER	AC IN
I
		I/O PORT
O
		5 I/O PORT connector

aPOWER switch

Turns on and off the power of this unit.

bAC IN (AC power input) connector

Connect to an AC power source using an optional AC power cord. The power cord can be fixed to this unit using an optional plug retainer.

cCCU/CNU REMOTE (camera control unit/ camera command network unit remote) connector (8-pin)

Connect to the RCP/CNU connector of CCU or the MSU connector of CNU.

dAUX REMOTE (auxiliary remote) connector (8- pin)

eI/O PORT connector (50-pin)

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 111