Sony 950, 930, 900 manual Controlling the router from an RCP

4	Interlocking the RCP Assignment and WFM/PIX			is also automatically changed to follow the new
	Assignment			arrangement.
	When the assignment of any RCP is changed from the
	MSU-700A/750, the picture and waveform monitoring
	Figure 4-9: Interlocking RCP and monitor assignment
	1CAM monitor	2CAM monitor	3CAM monitor		4CAM monitor	5CAM monitor
	5CAM monitor	4CAM monitor	3CAM monitor		2CAM monitor	1CAM monitor

PIX WFM

PIX WFM

PIX WFM

PIX WFM

PIX WFM

Control 1CAM	Control 2CAM	Control 3CAM	Control 4CAM	Control 5CAM
Control 5CAM	Control 4CAM	Control 3CAM	Control 2CAM	Control 1CAM

When the RCP assignment is canged, PIX/WFM video is also changed automatically.

Controlling the router from an RCP

Pressing the preview switch on an RCP-700 Series control panel switches the appropriate digital router cross point. SDI video monitoring is enabled.

Figure 4-10:Router control from an RCP

	NTSC or PAL		CNU character
		PIX
CNU with BKP-7933
				MSU-700A

HDCU-900	SDI
with A/D board

IN1

SDI Monitor for RCP

HDCU-900	IN2	OUT1	PIX	WFM
		OUT2
with A/D board
	IN5	OUT5
	Router
HDCU-900	(DVS-V3232 etc.)
	Primary Station		PIX	WFM
with A/D board

S-BUS BNC
CCA-5	PIX	WFM
Video BNC

Controlling the RCP assignment from other S-Bus equipment

All S-Bus equipment detects the connection configurations between camera heads, HDCUs and RCPs by communicating with each other. This means that other S-Bus equipment can change the

assignment of RCPs in a system that does not include an MSU-700A/750

HDC-900/950/930 Series Product Information Manual Chapter 4 Control System 61