Sony 930 System Setup, 1Setting the System Format using HDCU-900, For CNU/ MSU/RCP, For HDCU-950

2	HKCU-901	SD Analog Interface Unit	CCA-5-10	Connection Cable (10
	HKCU-902	HD Analog Interface Unit		meter/33 feet)
	HKCU-903	Frame Rate Converter	RMM-301	Rack Mount Adaptor
		Unit	EX-854(A-8344-228-A) Extension Board
	HKCU-904	Line Converter Unit	EX-893(A-8344-696-A) Extension Board
	CCA-5-3	Connection Cable (3	For CNU/ MSU/RCP
		meter/10 feet)	BKP-7900	Extender Board for
	CCA-5-10	Connection Cable (10		CNU-700/500
		meter/33 feet)	BKP-7930	Expansion Board for
	EX-450(A-8314-633-A) Expansion Board			system expansion up to
	For HDCU-950			12 cameras for the CNU-
	AC power cord:	USA and Canada: 1-		700
		551-812-XX	BKP-7932	BVP-370 Series
		Other countries: 1-782-		Interface Board for the
		929-XX		CNU-700
	Power cord plug holder:USA and Canada: 2-		BKP-7933	S-Bus Interface Board
		990-242-01		for CNU-700
		Other countries: 3-613-	CCA-5 Cables	8p-8p cables for the
		640-01		CNU-700/500, MSU-
	HKCU-951	SD Encoder Unit		700A/750, VCS-700 and
	HKCU-953	HD Frame Rate		RCP-700 Series
		Converter Unit		CCA-5-3	3 m
	CCA-5-3	Connection Cable (3		CCA-5-10	10 m
		meter/10 feet)		CCA-5-30	30 m

2-7.System Setup

2-7-1Setting the System Format using HDCU-900

The HDCU-900 can support input and output of multiple formats. It can also support various types of user’s format by installing the optional circuit boards.

HDCU-900 and list of optional boards

The slots to which the circuit boards are inserted and the internal switches of the unit differ depending upon the system used. They need to be set according to the system used.

Model name	Board name	Board name	Slot to be installed
	(Slots on the front)	(Slots on the rear)
	DPR-163	SDI-54A	Fixed to the top most slot
HDCU-900	RC-86	DIF-102	Second or third slot from the top
	AT-141	–	Fixed to the bottom most slot
SD Analog Interface Unit	IF-789A*1/789P*2	VDA-57	Third slot from the top
HKCU-901
HD Analog Interface Unit	–	ADA-59	Second or third slot from the top
HKCU-902
Frame Rate Converter	FC-83	SDI-54B	Second slot from the top
Unit HKCU-903
Line Converter Unit	LC-41	SDI-54C	Second or third slot from the top
HKCU-904
*1 for the USA and Canada.
*2 for the countries other than the USA and Canada.

Note

•Be sure to install the HKCU-901 of the same -regional location as the HDCU-900.

•When the HKCU-901 is going to be installed, confirm beforehand that the RC-86 board is installed in the second slot from the top on the front side, the DIF- 102 board or the HKCU-902 is installed in the second slot from the top on the front side.

•When installing the optional boards, be sure to start installation from the second slot from the top on both the front side and rear side. Never install an optional board in the third slot from the top leaving the slots blank without installing the board.

•Be sure to install the HKCU-901/903/904 into the same slot on the front and rear sides.

•Do not install two or more of the same circuit boards at the same time.

HDC-900/950/930 Series Product Information Manual Chapter 2 Total System 21