Sony 930, 950 10-4Connector Panel, Iris gauge, White line on the gauge provides a click position

7	j Iris gauge
	The white line on the gauge provides a click position
	for the IRIS control. Turn the gauge to set the line to the

most frequently used iris position, and it can be used as the reference for manual iris adjustment. The gauge rotates infinitely in either direction. When no click position is required, set the line outside the rotation range of the IRIS control.

kAUTO button

Press and light the button to automatically adjust the iris according to the amount of input light. When this button is lit, the reference value for automatic iris adjustment can be set in a range of ±1f with the iris control. If you press the button when lit, it goes dark and manual iris adjustment is enabled.

7-10-4Connector Panel

1CCU/CNU REMOTE connector

2 AUX REMOTE connector

3 EXT I/O connector

REMOTE

CCU/CNU AUX EXT I/O

aCCU/CNU REMOTE (camera control unit/camera command network unit remote) connector (8-

pin)

Connect to the RCP/CNU connector of a camera control unit or the RCP connector of a camera command network unit.

bAUX REMOTE (auxiliary remote) connector (8-

pin)

Connect to the RCP-700/701.

cEXT I/O (external input/output) connector (9-pin) With expansion functions added, this connector permits you to control an external device.

Caution

When installing this panel, provide a gap of 7 cm (3 inches) or more behind the connector panel to prevent damage to cables.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 123