Sony 930, 950, 900 manual HD-SDI SMPTE-292M, Hd Sdi Out, Rcp/Cnu, Sd Sdi Out, Moni HD SDI

10

Dimensions Unit: mm (inches)

424 (16 3/4)

465 (18 3/8)

481 (19)

460 (18 1/8)

	(2 3/8)	133 (5 1/4)
52.7

10-5.HDCU-950, HD Camera Control Unit

General			HD-SDI: SMPTE-292M,
Power supply	100 to 240 V AC, 50/60 Hz		1.485 Gbps/1.4835 Gbps
Current consumption	3.6 A max.		SD-SDI: SMPTE-259M, 270
Standby power Approx.	5 W		Mbps
Peak inrush current	(1) Power ON, current	REFERENCE	BNC type (2), loop-through
	probe method:		output
	30A (240V), 8A (100V)		HD: SMPTE-274M, tri-level
	(2) Hot switching inrush		sync, 0.6 Vp-p, 75 ohms
	current, measured in		SD: Black burst
	accordance with European		(NTSC: 0.286 Vp-p, 75
	standard EN55103-1:		ohms)
	26A (230V)		(PAL: 0.3 Vp-p, 75
Operating temperature	–10°C to +40°C (+14°F to		ohms)
	+104°F)		or NTSC 10F-BB
Storage temperature	–20°C to +50°C (–4°F to	PROMPTER	BNC type (2), loop-through
	+122°F)		output, analog signal, 1.0
Mass Approx.	6.5 kg (14 lb 5 oz)		Vp-p, 75 ohms
Dimensions	See below	MIC REMOTE	D-sub 15-pin (1) (JAE-
(Unit: mm/inches)			made DAC1-J10
			recommended)
Input/output connectors			(switchable to WF
CAMERA	Optical fiber connector (1)		REMOTE by an internal
1.485 Gbps/1.4835 Gbps SDI × 2,			setting)
180 V DC power supply
INCOM/TALLY/PGM	D-sub 25-pin (1)	Output connectors
	• INCOM-4W, 2 systems	MIC	XLR 3-pin, male (2),0 dBu/
	(PD /ENG), 0 dB		–20 dBu
	• PGM, 2 systems, 0 dB/	HD SDI OUT	BNC type (2), SMPTE-
	–20 dB		292M, 0.8 Vp-p, 75 ohms,
	• TALLY (R, G)		1.485 Gbps/1.4835 Gbps
RCP/CNU	8-pin multi-connector (1)	SD SDI OUT	BNC type (2), SMPTE-
			259M, 0.8 Vp-p, 75 ohms,
Input connectors			270 Mbps
AC IN	100 to 240 V AC	MONI (HD SDI)	BNC type (1), 0.8 Vp-p, 75
RET 1/2/3	BNC type (3),		ohms, 1.485 Gbps/1.4835
	VBS: 1.0 Vp-p, 75 ohms		Gbps

HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications 183