Sony 900, 930, 950 manual Auto Level START/ White Black HUE Break, Monitor output select buttons

7	f STANDARD button
	When you press this button, the video camera is
	initialized to its standard state and the button lights for
	several seconds. If you press the button while it lights,
	the video camera returns to the state before the button
	was lit.
	g AUTO SETUP block
	For automatic adjustments of cameras.
	1	2	3	4

AUTO SETUP

AUTO LEVEL START/ WHITE BLACK

HUE BREAK

AAuto adjustment item select buttons

Press and light up these buttons to select the items to be automatically adjusted.

AUTO HUE: Skin tone detail automatic hue

LEVEL: Gamma balance, knee point, master

black level, etc.

BSTART/BREAK button

Press to start automatic adjustment of the selected items. The button lights during adjustment and goes dark when adjustment is completed. If you press the button when lit, the automatic adjustment is canceled and the

button flashes. To stop the flashing, press the button again.

CWHITE (white balance) button

Press to automatically adjust the white balance. The button lights during adjustment and goes dark when adjustment is completed. If you press this button when lit or the START/ BREAK button, the automatic adjustment is canceled and the button flashes. To stop the flashing, press the

button again.

D BLACK (black balance) button

Press to automatically adjust the black balance

display contents can be changed through a menu operation.

iScene file control block

1 SCENE FILES button

2 STORE button

1 2 3 4 5

SCENE FILES STORE

ASCENE FILES buttons

While the STORE button is flashing: When you press one of these buttons, the current setting data is stored as a file of the corresponding number.

When the STORE button is dark: The stored data can be retrieved by pressing and

lighting up the button of the desired number. Press the lit button to turn it dark and resume the previous status.

BSTORE button

To store a scene file, first press this button so that the button starts flashing, then press the SCENE FILES button of the desired number.

When file registration is completed, the STORE button goes dark. To cancel the registration, press the flashing button again before pressing the SCENE FILES button. The STORE button goes dark.

jMonitor output select buttons

Press to select the output signal from the WF2 and PIX2 OUTPUT connectors of CCU.

12

R G B SEQ ENC

and black set. The button lights during

adjustment and goes dark when adjustment is

MONITOR

WF PIX

completed. If you press this button when lit or

the START/ BREAK button, the automatic

adjustment is canceled and the button flashes.

To stop the flashing, press the button again.

Note

If an error occurs during adjustment, the

pressed button flashes.

hCamera/CCU function ON/OFF buttons

Various functions of the video camera or the CCU can be turned on and off from this unit (ON when the button is lit).

The following switching functions are assigned to four of the buttons at the factory and the other three buttons are reserved for future use.

5600K AUTO	SKIN	CHARACTER
KNEE	DETAIL

5600K: 5600K -electronic color temperature conversion function

AUTO KNEE: Auto knee function. When this button is lit (ON), the knee point is automatically adjusted according to the light content of the picture.

SKIN DETAIL: Skin tone detail function

CHARACTER: System information display function. The various information on the entire system is displayed on the monitor connected to the CHARACTER connector of the CNU-700. The

AOutput signal select buttons

After selecting the output connector of the CCU by pressing either the WF or PIX button, press to light the button for the signal to be output. The signal corresponding to the lit button is output. R/G/B: Select the R signal, G signal, or B signal.

The signals can be selected either independently or in combination. When any of these buttons is pressed, the SEQ (for WF only) and ENC circuits are turned off.

SEQ (sequence): Effective only for the WF2 OUTPUT connector. When this button is pressed, the R/G/B circuits are turned off, and the SEQ signal is output. You can monitor the waveforms of the three R, G, and B signals in sequence on a waveform monitor.

ENC (encode): When this button is pressed, the R/G/B and SEQ circuits are turned off, and the

ENC signal is output.

BOutput connector select buttons

WF: Press to light the button when switching the output signal from the WF2 OUTPUT connector with the output signal select buttons. Press the button again to make it go dark.

PIX: Press and light the button when switching the output signal from the PIX2 OUTPUT connector with the output signal select buttons. Press the button again to make it go dark.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 113