Sony 930, 950, 900 HDVF-C700W/C750W, HD Electronic Viewfinder, 16-1Appearance, Red tally lamps

7 7-16.HDVF-C700W/C750W, HD Electronic Viewfinder

7-16-1Appearance

The figure illustrates the HDVF-C750W. The parts of the HDVF-C750W and the HDVF-C700W have basically the same functions.

1 POWER switch

2 (attention) indicator

3 Red tally lamps

4 BRIGHT control

5 Friction adjustment/lock lever

6 CONTRAST control

7 PEAKING control

8 BATT indicator

9 Green tally lamps

q; Lift-lock release knob 1

Front

Rear

qa External tally lamp

qs External tally dimmer control

qd TALLY ON/OFF switch

qf Blanking marker ON/OFF switch

qg Tally dimmer switch

qh Lift-lock release knob 2

qj CAMERA connector

qk Clamper

ql Mounting wedge

aPOWER switch

Turns the power supply from the camera to the viewfinder on and off.

b (attention) indicator

This indicator lights when the camera detects certain conditions. The particular conditions which cause the indicator to light up are set up by the camera.

For information on how to set up and verify the conditions under which the indicator will light, refer to the manual for the camera being used.

cRed tally lamps

Light up when the camera receives a red tally signal.

dBRIGHT (brightness) control*1 Adjusts the picture brightness.

eFriction adjustment/lock lever

Adjusts the amount of friction in the tilting mechanism. Also, locks the viewfinder into a desired angle. The angle is locked when the lever is pushed toward the camera lens. When the lever is pulled toward the back of the camera, the tilting mechanism can be adjusted.

fCONTRAST control*1 Adjusts the picture contrast.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 138